English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Lever Switch
| Item No.: | LS3D |
Supplier Details
Country: Taiwan
City: Taoyuan City 32062, Taiwan, R.O.C.
Address: 6F., No. 25-2, Ji-Lin Road, Chung Li District. (Chung Li Industrial Park)
TEL: +886-3-4333210
Fax: +886-3-2617799
Online Showroom:
100 Products
Features:
Mounting
Before mounting, dismounting, wiring, or inspecting a switch, be sure to turn OFF the power supply to the switch, otherwise an electric shock may be received or the switch may burn.
Wiring
Do not perform wiring when power is being supplied to a switch.Also, do not touch any of the charged terminals when power is being supplied. Otherwise, electric shock may be received. Follow the instructions provided in Correct Use for all wiring and soldering work. Using a switch with improper wiring or soldering may result in abnormal heating when power is supplied, possibly resulting in burning.
Contact Load
Select suitable switch ratings after confirming contact load. If the contact load is excessive for the contacts, the contacts may weld or shift, possibly resulting in short-circuits or burning when power is supplied.
Load Types
Some types of load have a large difference between steady-state current and inrush current, as shown in the following diagram. Select a switch with ratings suitable for the type of load. The higher the inrush current in the closed circuit is, the more the contact abrasion or shift there will be. Consequently, contact welding or shifting may occur, possibly resulting in short-circuits or burning.
- The control unit provides both momentary operation by lever and center push operation.
- Using a single knob enables compound actions with simple operations.
- Reflow solderable.
- Gold plated contact to ensure low contact resistance.
- For the operation of telecommunication equipment such as mobile phone, etc.
- Compact, portable units such as camcoders, portable audios, car radios, etc.
- If you are interested in any of our products, please do not hesitate to contact us.
- Both left and right directions.
- FP-TV, DVD player, camera, PC & Peripherals, personal audio, health care, mobile phone & peripherals.
Mounting
Before mounting, dismounting, wiring, or inspecting a switch, be sure to turn OFF the power supply to the switch, otherwise an electric shock may be received or the switch may burn.
Wiring
Do not perform wiring when power is being supplied to a switch.Also, do not touch any of the charged terminals when power is being supplied. Otherwise, electric shock may be received. Follow the instructions provided in Correct Use for all wiring and soldering work. Using a switch with improper wiring or soldering may result in abnormal heating when power is supplied, possibly resulting in burning.
Contact Load
Select suitable switch ratings after confirming contact load. If the contact load is excessive for the contacts, the contacts may weld or shift, possibly resulting in short-circuits or burning when power is supplied.
Load Types
Some types of load have a large difference between steady-state current and inrush current, as shown in the following diagram. Select a switch with ratings suitable for the type of load. The higher the inrush current in the closed circuit is, the more the contact abrasion or shift there will be. Consequently, contact welding or shifting may occur, possibly resulting in short-circuits or burning.
