English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Extruded Aluminum Tubing Round
| Item No.: | 6xxx Commercial Aluminum Alloy |
Supplier Details
Country: Taiwan
City: Tainan City 710, Taiwan
Address: No.28, Xinggong Rd., Yongkang Dist.
TEL: +886-6-2335308
Fax: +886-6-2326904
Online Showroom:
31 Products
Aluminum Round Tube
Dimensions: mm (Millimeter)
OD=Out Side Diameter
t=Wall Thickness
Extrusion --OD: φ20 ~φ150(cross section Area: 100mm2~10000mm2)Following by EN 755, ASTM B221M
Cold Drawn --OD: φ15 ~φ60 Following by EN 755,
6000 series is a precipitation hardening aluminum alloy containing magnesium and silicon as its major alloying elements. 6061 has good machinability and good weldability. Typically, after welding, the properties near the weld are those of 6061-0, a loss of strength of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece. After welding, the material can naturally age and restore some of its strength. 6061 is one of the most common alloys of aluminum for general purpose use. Conforms to ASTM B221.
Inquiries are welcome.
Dimensions: mm (Millimeter)
OD=Out Side Diameter
t=Wall Thickness
Extrusion --OD: φ20 ~φ150(cross section Area: 100mm2~10000mm2)Following by EN 755, ASTM B221M
Cold Drawn --OD: φ15 ~φ60 Following by EN 755,
- Material: 6xxx,
- Temper: F, O, T4(2), T6(51), T8, T9, T89
- Type: Extrusion and Cold Drawn
- Application: Aerospace, Automobile, Bike, Other commercial application
- Products: Machining parts, Architect decoration, Body of Bike, Scope
- Prompt delivery time: 25~35 working days (depends on the difficulty of procedure, quantity, and specific requirements from customer)
- Sizes and designs are all customize
- Origin: Taiwan
6000 series is a precipitation hardening aluminum alloy containing magnesium and silicon as its major alloying elements. 6061 has good machinability and good weldability. Typically, after welding, the properties near the weld are those of 6061-0, a loss of strength of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece. After welding, the material can naturally age and restore some of its strength. 6061 is one of the most common alloys of aluminum for general purpose use. Conforms to ASTM B221.
Inquiries are welcome.