Injection Molding Cycle 2024-07-29 16:26:29

Injection molding cycle The sequence of events during the injection mold of a plastic part is called the injection molding cycle. The cycle begins when the mold closes, followed by the injection ...

Injection Molded Parts 2024-07-29 16:32:28

Injection molding consists of the high pressure injection of the raw material into a mold which shapes the polymer into the desired shape. The selection of a material for creating injection mold ...

Thermoplastic Injection Molding 2024-07-29 16:34:37

The thermoplastic injection molding process is a standard process involving an aluminum mold with no heating or cooling lines running through it, which means cycle times are a bit longer. It allow ...

Two Shot Injection Molding 2024-07-29 16:36:26

One important element of double shot injection molding is the two materials must be compatible with each other and designed to overmold. In the first cycle, a nozzle injects plastic into a mold. ...

Two Shot Molding 2024-07-29 16:38:13

Double shot molding, sometimes referred to as two-shot molding, is a manufacturing process used to produce complicated molded parts from two different materials by molding plastic around a preform ...

Color Injection Molding 2024-07-29 16:40:06

Since the two sets of injection units and the nozzles of the two-color machine are separately separated, the color of the finished product is mostly two-color clear and is not mixed together. On t ...

SMC Molding 2024-07-29 16:41:59

Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. Injection Molding is a manufacturing process for producing parts in large volume. It is ...

Plastic Injection Molding Parts 2024-07-29 16:43:55

Injection molding is the most commonly used manufacturing process for the fabrication of plastic parts. Material for the part is fed into a heated barrel, mixed, and injected into a mold cavity, ...

High Voltage Rectifier Transformer 2021-04-14 15:52:09

HV Cast Resin Transformer Rectifiers Scope of application This specification includes the following rated capacities, design, manufacturing, testing, handling, installation, and warranty ...

Low Voltage Dry Type Transformer 2021-04-14 15:52:04

H Class Dry Type Transformers    Specification According to the standard: CNS 13390 or IEC 60076-11 or national standards Efficiency: Designed according to customer deman ...

Oil Reactor 2021-04-14 15:52:01

Oil Type Starting Reactor According to the standard: IEC 60076-6 Efficiency: Designed according to customer demand efficiency Voltage level: 36kV/24kV/12kV and below Number of ph ...

Resin Reactor 2021-04-14 15:50:19

Cast Resin Starting Reactor    Specification According to the standard: IEC 60076-6 Efficiency: Designed according to customer demand efficiency Voltage level: 36kV/24kV/1 ...

Variable Shunt Reactor 2021-04-14 15:50:04

Cast Resin Shunt Reactor According to standard: IEC60076  Type:AN Voltage level: 36kV or less Number of phases: single phase or three phase Material: copper-copper C ...

Reactors In Series 2021-07-05 09:10:14

Cast Resin Series Reactors    Specification According to standard: CNS 9094 or IEC 60076-6 or JEC-2210 Efficiency: Designed according to customer demand efficiency Vo ...

Single Phase Transformer 2021-04-14 15:48:00

LV Cast Resin Transformers(Single Phase)    Specification Scope of application This specification includes the following rated capacity, design, manufacturing, testing, handlin ...