English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Tiếng Việt
Aluminum Rods
| Item No.: | 2xxx, 7xxx Work Hardening Aluminum Alloy |
Supplier Details
Country: Taiwan
City: Tainan City 710, Taiwan
Address: No.28, Xinggong Rd., Yongkang Dist.
TEL: +886-6-2335308
Fax: +886-6-2326904
Online Showroom:
31 Products
Aluminum Round Rod
Dimensions: mm (Millimeter)
OD=Out Side Diameter
t=Wall Thickness
Extrusion --OD: φ15 ~φ70(cross section Area: 100mm2~2500mm2) Following by EN 755, ASTM B221M
Cold Drawn --OD: φ10 ~φ55 Following by EN 754
7000 series commercial aluminium alloys utilises zinc as the major alloying element and when combined with a smaller amount of magnesium, the result is a heat-treatable alloy which exhibits very high strength. 7075 and 7050, are the highest strength commercial aluminium alloys available and are used widely in applications such as high stressed parts and air frames. The corrosion resistance of the alloy is reduced due to the inclusion of zinc and magnesium, so copper is often introduced into the alloy to improve corrosion resistance. Applications for this range include critical parts used in the aerospace sector, automotive and sports equipment.
Copper is used as the primary alloying element in 2000 series aluminium alloys. For optimum performance, solutions heat treatment is required. Once heat treated, this range of alloys offers similar mechanical properties to that of mild steel and in some cases surpasses these properties. Resistance to corrosion is not as high when compared to other commercial aluminium alloy products which is why these alloys (in sheet form) are usually cladded with a high purity alloy. This process provides increased galvanic protection to the core material which significantly improves the materials overall corrosion resistance.
Inquiries are welcome.
The Max. Length of heat-treating and stress relief product is 160 inches / 4050 mm
Dimensions: mm (Millimeter)
OD=Out Side Diameter
t=Wall Thickness
Extrusion --OD: φ15 ~φ70(cross section Area: 100mm2~2500mm2) Following by EN 755, ASTM B221M
Cold Drawn --OD: φ10 ~φ55 Following by EN 754
- Material: 2xxx, 7xxx
- Temper: F, O, T3, T4, T5, T6, T651, T7x, T7x511 or T7x510
- Type: Extrusion and Cold Drawn
- Application: Aero Space, Automobile, Motorcycle/Scooter, Bike, Safety Product
- Products: Aircraft Structural Components, Aircraft Fittings, Hardware, Parts for The Transportation Industry , Mandrel Gear, Screw and Bolts, Carabiner, Hook, Hub
- Prompt delivery time: t.b.d
- Sizes and designs are all customize
- Origin: Taiwan
7000 series commercial aluminium alloys utilises zinc as the major alloying element and when combined with a smaller amount of magnesium, the result is a heat-treatable alloy which exhibits very high strength. 7075 and 7050, are the highest strength commercial aluminium alloys available and are used widely in applications such as high stressed parts and air frames. The corrosion resistance of the alloy is reduced due to the inclusion of zinc and magnesium, so copper is often introduced into the alloy to improve corrosion resistance. Applications for this range include critical parts used in the aerospace sector, automotive and sports equipment.
Copper is used as the primary alloying element in 2000 series aluminium alloys. For optimum performance, solutions heat treatment is required. Once heat treated, this range of alloys offers similar mechanical properties to that of mild steel and in some cases surpasses these properties. Resistance to corrosion is not as high when compared to other commercial aluminium alloy products which is why these alloys (in sheet form) are usually cladded with a high purity alloy. This process provides increased galvanic protection to the core material which significantly improves the materials overall corrosion resistance.
Inquiries are welcome.
The Max. Length of heat-treating and stress relief product is 160 inches / 4050 mm