English
中文繁體
Русско
Deutsch
Español
Português
Français
Türk
Italiano
Nederlands
हिन्दी
Bahasa Indonesia
Polypropylene Filter Cartridge
| Item No.: | PP Filter Cartridge_3 |
Supplier Details
Country: Taiwan
City: Taiwan(R.O.C.)
Address: No. 255, ZhongZun St, Luchu Dist, Taoyuan City, 338
TEL: +886-3-3541071
Fax: +886-3-3541075
Online Showroom:
69 Products
In-depth PP filter cartridge
The in-depth PP filter is a multi-leveled comprehensive filter, it is made by the manufacturing technology we developed. It is kind of Melt-Blown three leveled PP impurity filter, produced by three different diameters of nozzles. The product is structured with three different fibers, the inside is thin fiber and the outside is with thick fiber. In order to filtrate liquid impurities and reach the best filter efficiency. It could increase the filter impurity capacity, extend the service life and reduce the consumptive material cost.
Characteristics:
Operation conditions:
Maximum operation pressure difference: 60℃ 1.8kg/cm2
20℃ 3.2kg/cm2
Suggestive pressure difference changes at: 1.5kg/cm2
Highest operation temperature: 60℃
Industrial application:
Nominal rating: normal 0.5, 1, 3, 5, 10, 25, 50, 75, 100 micron
Materials of construction: 100% melt-blown thin PP fiber
Length: 9.87", 10", 20", 30", 40"
(251mm, 254mm, 508mm, 762mm, 1016mm)
Core diameter: 28mm
Outside diameter: 63mm
※ Able to make different materials, sizes and standards. Please contact us to discuss your applications and requirements.
The in-depth PP filter is a multi-leveled comprehensive filter, it is made by the manufacturing technology we developed. It is kind of Melt-Blown three leveled PP impurity filter, produced by three different diameters of nozzles. The product is structured with three different fibers, the inside is thin fiber and the outside is with thick fiber. In order to filtrate liquid impurities and reach the best filter efficiency. It could increase the filter impurity capacity, extend the service life and reduce the consumptive material cost.
Characteristics:
- Three leveled filter, high impurity capacity and long service life
- High filter efficiency through Melt-Blown superfine fiber
- 100% pure PP and High anti- chemical quality
Operation conditions:
Maximum operation pressure difference: 60℃ 1.8kg/cm2
20℃ 3.2kg/cm2
Suggestive pressure difference changes at: 1.5kg/cm2
Highest operation temperature: 60℃
Industrial application:
- Electroplate, etching and development in PCB industry
- Traditional electroplate liquid filtration
- Pre-filter for industry aqua pura filter system
- Low viscosity chemical liquid purify and filtration
- Engineering and recycling water filtration.
Nominal rating: normal 0.5, 1, 3, 5, 10, 25, 50, 75, 100 micron
Materials of construction: 100% melt-blown thin PP fiber
Length: 9.87", 10", 20", 30", 40"
(251mm, 254mm, 508mm, 762mm, 1016mm)
Core diameter: 28mm
Outside diameter: 63mm
※ Able to make different materials, sizes and standards. Please contact us to discuss your applications and requirements.